Carda Geothermal Engineering PLLC
Geothermal heat pump engineering, from ground loop to mechanical room
Independent design, review and oversight for commercial, institutional and multifamily geothermal systems. Led by Ryan Carda, P.E., who has engineered ground source heat pump systems since 2004.
- Co-author, IGSHPA Design and Installation Manual
- Former Chair, IGSHPA Standards Committee
- Creator of the LoopLink geothermal design software
- Licensed P.E. in 17 states
- IGSHPA Certified GeoExchange Designer
- NY-GEO and IGSHPA Board of Directors
Geothermal engineering for the people who build and own these systems
Geothermal heat pump systems succeed or fail on details that sit between disciplines: the ground loop, the source-side piping, the pumps, the fluid, and the way it all gets installed. Carda Geothermal Engineering focuses on exactly that space, and works alongside your existing team rather than replacing it.
Mechanical engineers of record
Ground loop design and source-side review delivered as design-assist under your seal, or sealed by Ryan Carda, P.E., where licensed. You keep the building; the loop gets a specialist.
Owners and facility managers
School districts, municipalities, colleges, housing authorities and developers get an independent technical voice from feasibility through construction, with no drilling or equipment sales attached.
Architects and design teams
Early guidance on whether geothermal fits the site, how much land the borefield needs, and what it means for schedule and budget.
Design-build contractors and drillers
Stamped or unstamped loop designs, CAD details, specifications and QA programs, from someone who has run a commercial design-build geothermal operation.
Geothermal consulting services
Ground Loop Design
Borefield sizing, headers, pipe sizing calculations, details and specifications for closed-loop ground heat exchangers.
Learn more
Peer Review
An independent check of a ground loop or geothermal system design before it's built.
Learn more
MEP Design Review
A review of the heat pumps, piping, pumps and fluid for what they do to the ground loop.
Learn more
Owner's Rep Guidance
Feasibility, procurement and technical oversight on the owner's side of the table.
Learn more
Construction Admin & QA/QC
Submittal review, field observation, pressure testing, and flush-and-purge verification.
Learn more
Tax Incentive Consulting
Engineering documentation that supports federal tax credits and state and utility incentives.
Learn more
Forensic Analysis
Finding out why an existing geothermal system isn't performing, and what to do about it.
Learn more
CAD Drafting
Borefield layouts, installation details and as-builts in AutoCAD.
Learn more
Selected project experience
Ground loop design for multifamily, affordable and senior housing, from Passive House towers to master-planned communities.
Affordable multifamily (LIHTC) · 154 units · 7 stories
Tevis Place
North Bethesda, Maryland
Engineer of record for the geothermal system serving every apartment, common area and the parking garage of an all-affordable building designed for Passive House (PHIUS) and NGBS Emerald certification.
144tons
48bores
600 ftbore depth
Designed while at Midwest Geothermal
Senior rental community · 97 units
Serenbe aging-in-place community
Chattahoochee Hills, Georgia
Ground loop design for the geothermal heating and cooling system serving Serenbe's new aging-in-place campus, with a clubhouse and medical building.
133tons
42bores
570 ftbore depth
Independent consulting
Market-rate multifamily · 252 units · 13 buildings
Elliott Parc
Gahanna, Ohio
A dedicated ground loop for every building, with breezeway manifolds feeding HDPE home runs to a heat pump in each unit. Modeled at a 63% reduction in energy use and emissions.
180+bores
400 ftbore depth
13independent loops
Designed while at Midwest Geothermal
Project types: K-12 schools · colleges and campuses · municipal and county facilities · multifamily and mixed-use · planned communities · networked geothermal and thermal energy networks · commercial and institutional buildings
Why work with Carda Geothermal Engineering
Two decades in geothermal, and nothing else
Since 2004, every role Ryan has held has been in ground source heat pumps: manufacturer R&D, design software, nationwide consulting, residential scale-up, and commercial design-build.
Experience from every side of a project
Most design problems show up later as construction or operating problems. Having worked as the designer, the contractor, the software developer and the trainer, Ryan designs for what actually happens in the field.
Grounded in the industry standards
Ryan co-authored IGSHPA's design and installation manual, chaired IGSHPA's Standards Committee, and contributed to the geothermal chapter of the ASHRAE HVAC Applications Handbook. Work follows ASHRAE design methods and CSA/ANSI/IGSHPA C448.
Independent
Carda Geothermal Engineering is an independent consulting practice. The firm doesn't drill, install or sell equipment, so every design and review recommendation is based on what's right for the project.
Geothermal engineering for projects nationwide
Based in New Paltz, in New York's Hudson Valley, Carda Geothermal Engineering works with owners, engineers and contractors on projects anywhere in the country, with site visits wherever a project needs them. Ryan Carda is a licensed Professional Engineer in Colorado, Connecticut, Illinois, Maine, Maryland, Massachusetts, Michigan, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, South Dakota, Utah, Vermont and Washington.
Have a geothermal project in planning, design or trouble?
Send a few details about your project and what you need. You'll get a reply within one business day.
Request a proposal